Home > ASTM F1554

ASTM F1554

ASTM F1554 Specifications

The specification for ASTM F1554 covers straight and bent, headed and headless, carbon, carbon boron, alloy, or high-strength low alloy steel anchor bolts (also known as anchor rods). The anchor bolts are furnished in three strength grades, and in the sizes specified below

Mechanical Requirements

Grade Marking Size inches Tensile Strength, ksi (MPa) Yield Strength, min,ksi (MPa)
36 ASTM F1554 AB36 ATLROD 14 – 4 58 – 80(400-558) 36(248)
55 ASTM F1554 AB55 ATLROD 14 – 4 75 – 95(517-655) 55(380)
105 ASTM F1554 AB105 ATLROD 14 – 3 125 – 150(862-1034) 105(724)

Grades

 F1554 Grade 36    Low carbon, 36 ksi yield steel anchor bolts
 F1554 Grade 55    High strength, low alloy, 55 ksi yield steel anchor bolts
 F1554 Grade 105    Alloy, heat treated, high strength 105 ksi yield steel anchor bolts

** When Grade 36 is specified, a weldable Grade 55 may be furnished at the supplier’s option.

Threading:  Threads shall be rolled, cut or ground at the option of the manufacturer, unless otherwise specified

 Chemical Requirements

Element Grade 36  Grades 55 and 105 
 Sizes up to 3/4   Sizes over 3/4 to 1-1/2   Sizes over 1-1/2 to 4 
Carbon 0.26% 0.27% 0.28%
Manganese * 0.60 – 0.90% 0.60 – 0.90%
Phosphorus, max 0.04% 0.04% 0.04% 0.040%
Sulfur, max 0.05% 0.05% 0.05% 0.050%
Copper, min (when specified) 0.20% 0.20% 0.20% 0.20%
* Optional with the manufacturer but shall be compatible with weldable steel

 

Element Grade 55 and 105 
   Heat Analysis      Product Analysis  
Phosphorus, max 0.040 0.048
Sulfur, max 0.050 0.058
 Copper, min (when Cu is specified) 0.20 0.18

See Also: ASTM F1554 Specification on ASTM.org.

3 thoughts on “ASTM F1554

  1. Pingback: Bdsm, dungeon, neko, furry

  2. Pingback: Stiri

  3. Pingback: מיזוג אוויר

Comments are closed.