F467 Aluminum Hex Nuts

Since 1981 Atlanta Rod & Mfg has been providing Aluminum F467 hex nuts for special DOT projects. We frequently manufacture them and assemble with 410 stainless bolts. These nuts are precision forged and machined to customer specifications. We are ready to manufacture them for your next DOT project on demand. Just give us a call and advise on the lead time required, and we will make it happen! We manufacture F467 nuts in many sizes from 3/8″ – 3″ in diameter.  We made the nuts below and shipped rush to a job site in Virginia. We look forward to hearing from you soon!

 

Domestic A193 B8M Hex Bolts

Atlanta Rod & Manufacturing produces large quantities of Domestic A193 B8M Hex Bolts every day at our facility in Georgia

B8M hex Bolts are made from 316 Stainless steel and are used in a variety of different industries including waterworks, oil & gas, heavy construction and many more

Finding B8M Hex Bolts made from domestic material can be challenging especially in larger diameters but Atlanta Rod has you covered from 3/8’’ to 2 ½’’

Atlanta Rod also manufactures A194 Hex nuts to go along with the bolts you are looking for

Give us a call today 800-633-6794 or send over a quote to sales@atlrod.com

C276 Fasteners

Atlanta Rod & Manufacturing forges massive quantities of C276 Fasteners in our plant every day for domestic and export projects.

C276 is a nickel-molybdenum-chromium wrought alloy that is considered a “versatile, corrosion resistant alloy.” C276 has excellent corrosion resistance to both oxidizing and reducing media as well as excellent resistance to localized corrosion attack. C276 is very easily fabricated by Atlanta Rod and doesn’t require heat-treating after forging or welding. C276 performs very well in many industrial applications, namely chemical processing.

Whether you are looking for a large run of 3/4” Heavy Hex Nuts or a small run of custom 1 1/2” Hex Bolts and everything in between, Atlanta Rod & Manufacturing is your source for C276 fasteners.

Give us a call 800-633-6794 or email your quote to SALES@ATLROD.com

 

 

AIS Compliant Bolts and Nuts

Have you been seeing a lot of your projects requiring AIS compliant bolts, rods or nuts? Not sure what AIS means?

The American Iron and Steel (AIS) provision requires Clean Water State Revolving Fund (CWSRF) and Drinking Water State Revolving Fund (DWSRF) assistance recipients to use iron and steel products that are produced in the United States. This requirement applies to projects for the construction, alteration, maintenance, or repair of a public water system or treatment works.

It was originally started in 2014 and meant to last only a year but it has been renewed each year and in September 8, 2017, the President signed Public Law 115-56, the “Continuing Appropriations Act 2018 and Supplemental Appropriations for Disaster Relief Requirements Act, 2017″ which provides fiscal year 2018 partial-year appropriations through December 8, 2017. This law continues the requirement for the use of AIS products in DWSRF projects.

Not sure if your project or fasteners apply for an exemption from this Law?

There is no broad exemption for fasteners from the American Iron and Steel (AIS) requirements. Significant fasteners used in SRF projects are not subject to the waiver for projects and must comply with the AIS requirements. Significant fasteners include fasteners produced to industry standards (e.g., ASTM standards) and/or project specifications, special ordered or those of high value.

Atlanta Rod can manufacture your AIS compliant fasteners to your ASTM standards, project specifications, or special requirements – all while meeting the domestic criteria that allows you to be a AIS Drinking Water State Revolving Fund assistance recipient.

Consider us, Atlanta Rod for your next DWSRF or CWSRF project where you want American Iron and Steel Bolts, Rods or Nuts.

 

Domestic Stainless Nuts and Bolts for Waterworks Projects

Atlanta Rod & Mfg. Co. Inc. has been manufacturing domestically melted and manufactured nuts and bolts for the Waterworks industry from our plant in Georgia since 1981. We make 100% domestic stainless fasteners for Waterworks projects used in flanges.  We supply full tractability back to the US  Stainless Mill. Please contact us for your next Waterworks project stainless bolting needs. We’re happy to meet the lead time that you require and we look forward to hearing from you soon!

Domestic A574 Socket Head Cap Screws

Having a hard time finding domestic socket head cap screws in the material and specification that you need? No problem, Atlanta Rod specializes in making hard to find fasteners. We can make anything from hex cap screws to domestic socket head cap or flat-head socket cap screws. We recently finished an order of 2″ domestic socket head cap screws to ASTM A574. These domestic fasteners were made from domestic raw materials and manufactured and tested at our bolt plant in Lavonia, GA.  If you are looking for competitive pricing and killer lead times, please give us a call on your next project!

post

2017 NACE Corrosion Conference & Expo

Atlanta Rod & Manufacturing is excited to be exhibiting at the 2017 NACE Corrosion Conference & Expo in New Orleans March 26th – 30th.

CORROSION is the world’s largest corrosion conference and exposition and will welcome more than 6,000 corrosion engineers, scientists, researchers, technicians, asset owners, inspectors, and other professionals from over 60 countries across the world.

This year will be our first attending the show and we look forward to seeing some familiar faces and developing new relationships in an exciting industry.

Atlanta Rod manufactures 100% domestic stainless steel nuts, bolts and studs to be used in applications where corrosion is an issue. We also work with specialty alloys used in corrosive environments such as Monel 400 and K500, Nitronic 50 and 60, Hastelloy, Inconel, Duplex and many more.

Come by and see John and Chase at booth # 754!